Extrusion Tools Nipple Wire Guides Tip Dies

The Extrusion Tips produced by us are guaranteed a concentricity with 0.002mm(.0005″) to fixed center cross heads. The inner core of the tip is made smooth to avoid any kind of wire breaks The flow areas of tips are highly polished to ensure following advantage of the Extrusion Tools Nipple Wire Guides Tip Dies

Extrusion Tools Nipple Wire Guides Tip Dies

The Extrusion Tips produced by us are guaranteed a concentricity with 0.002mm(.0005″) to fixed center cross heads. The inner core of the tip is made smooth to avoid any kind of wire breaks The flow areas of tips are highly polished to ensure following advantage

1) Better polishing of cable

2) Material saving

3) Cost saving

4) Smooth flow of plastic without burning

MN design and manufacture Extrusion Tips for Inline Heads, Adjustable Center Cross Heads and Fixed Center Cross Heads in

1) Pressure Extrusion

2) Semi-Pressure Extrusion

3) Sleeve Extrusion

◎ Material

1) Nature diamond insert

2) Polycrystalline diamond insert

3) Tungsten carbide insert

4) Tungsten carbide whole

5) Harden steel

Features

Extrusion tools are commonly used to apply an insulating layer around a solid or stranded wire. The extrusion tip, also called extrusion wire guide, guides a single or group of wires into and through an extrusion die. The extrusion die controls the shape and size of the insulating material around the wire.

Super-hard material inserts in the wire guides, primarily diamond and carbide, ensure long tool life even at high extrusion process speeds.

BENEFITS

Insulation material savings

Superior concentricity capabilities

Wire perfectly centered within insulation material

Optimal insulation flow

Long lasting tools

Custom tip and die manufacturing available, turning your ideas into reality

KEY FEATURES

Very high tip concentricity (tip and die)

Very high tip roundness (tip and die)

Inserts located close to tip’s end

Various materials available

High quality surface finish

Extrusion Dies

MN design and manufacture extrusion dies for Inline Head, Adjustable Center Cross Heads and Fixed Center Cross Heads in

1) Pressure Extrusion

2) Semi-pressure Extrusion

3) Sleeve Extrusion

The concentricity of the Fixed Center Die is ensured within 0.002mm(0.0005″) for high control of polymer layer on the core.

◎ Material

1) TC insert

2) TC whole

3) Harden steel

4) Chroming steel